Hylomar® is a polyester-urethane based sealant that transforms from a gel-like material into a re-sealable, non-setting, non-hardening putty within minutes of application. Because it is non-setting, Hylomar® sealant offers unlimited assembly time and is resistant to vibration and thermal expansion.

Hylomar® is the leading brand of non-hardening sealants for a wide variety of high temperature and oil resistant gasketing applications.

HYLOMAR is adopted world-wide in sealing petrol and diesel engines and automotive transmissions. Typical applications:Water and oil pumps, instrument inspection covers, cylinder heads and cast oil pans. Coating pre-formed gaskets,weatherproofing motors and outdoor high voltage circuit breakers. Inlet manifolds, timing case covers, oil pump joints, gearbox and transmission components. Thread sealing, gas turbines,water-cooled generators, turbo vacuum systems and any machined flange.

Hylomar is non-setting and nonhardening, even at high temperatures, and can be used to seal machined joint faces and threaded parts. Highly engineered non-setting and non-hardening

sealant compound specifically developed for use in the aerospace industry. Defence specification DTD 900/4586. HYLOMAR Aerograde carries Rolls Royce approvals MSRR9055 and OMAT numbers 4/46 (light) and 4/47 (medium). Hylomar products are resistant to a wide range of fluids including most industrial fuels, oils, brine, air, turbine and piston engine combustion products,water,water/glycol and methanol mixtures, petroleum and synthetic diester lubricating oils, gasoline and kerosene fluids (Avtur & Avcat) as well as some fluorocarbon refrigerants.

HYLOMAR as a Flange Sealant:

• Non hardening - non curing compound
• Seals rigid flanges with gaps up to 0.010"
• Provides instant sealing for immediate leak test
• Self healing after severe joint movement Thermal cycling of bimetal components, Shock, Vibration
• Allows for easy disassembly by hand
• Reusable - resealable
• Absolute cleaning no necessary
• Unlimited shelf life
• Will not promote corrosion on any surface

HYLOMAR as a Gasket dressing:

• Holds gasket in place during assembly
• Allows for repositioning at any time
• Gives instant seal during start-up
• Prevents gasket bake-on
• Provides leak free joint after gasket sets
• Won't harm gasket

HYLOMAR as a Thread sealant:

• Instant seal
• Liquid for easy application
• Reusable many time without touch up
• Superior vibration resistance without locking
• Constant prevailing torque
• Provides anti-seize properties
• May be bulk tumbled - Dry to touch in ten minutes
• May be applied by brush from can or equipment (bolt-coater)

Hylomar is resistant to:

Air, Ammonia (Whitens but is otherwise unaffected) Ammonia gas - liquid under pressure OK , Anhydrous solutions ATF , Boron content, but concern over 484ºF Butane, Diesel, Engine combustion products, Ethylene Freon, Gasoline, Gas contaminated with H2S, Hydrogen peroxide Isobutane, Kerosene, Mineral oils, methane, Natural gas Nickle plated parts, Nitrogen, Petroleum products, Propylene, Propane Phosphate esters, Salt, Seawater, Stainles steel, Syntetic diester lubricants Titanium and alloys, Tap water, Water, Water/glycol 5W30 motor oil, 10W30 motor oil, Any low molecular weight paraffinic or napthenic fuels